Domed Sticker

Domed Sticker Online

Hirst Arts

-Click here to sort by number instead-

name=52

Will make all blocks needed to build the Circular Tower.

. Also contains arrow slit blocks, decorative braces, circular stairway pieces and blocks to seamlessly splice curved towers into existing flat walls.

Click herefor instructions on building the bridge.

Will make all blocks needed to build the travelers bridge. Special pieces include a 3 wide archway, bridge railings, stair builder block, and decorative trim pieces.

name=57

This mold is used to help finish the interior of an inn. Includes spiral and straight stairway pieces and rails, small stone pieces for fireplaces and ovens, wooden panels, rails and shelves, table and bench.

name=58

This mold has commonly used items to dress up the interior of an inn. Includes 2 doors, bar counters, shelves, ship stairs, chairs round and square tables, chairs, window inserts and other small accessories.

that are more difficult to cast them normal. To get good results you need to use a

to get the plaster into the small pockets of the mold.

Please refer to theAdvanced Casting Instructionspage on using a surfactant and vibrating table.

name=59

used to dress up an inn. Includes wardrobe, bed, desk, cabinets, shelves, wine rack, bottles, books, dishes and other tiny accessories.

To get good results you need to use a

to get the plaster into the small pockets of the mold.

Please refer to theAdvanced Casting Instructionspage on using a surfactant and vibrating table.

Click herefor instructions on building the tower.

This mold will make all of the blocks needed to build the Prison Tower. Includes 2 new sizes of Roman arches, decorative corner blocks plus special pieces to make wrap-around stairways.

Click herefor instructions on how to use the turret mold.

This mold will make all of the blocks needed to build small round towers and turrets.

. It includes a domed roof, round window, decorative base for corner turrets and blocks to seamlessly splice round turrets into existing flat walls.

Click herefor instructions on building the tower.

Will make blocks to build a 5 wide octagon tower (measured outside from flat to flat).

Additional basic blocks are needed to build the tower

. It includes a new style of arrow slit, brick edged window arches and trim pieces.

Click herefor instructions on building the tower.

Will make blocks to build an 8 outside diameter tower. It includes basic building blocks, an arrow slit and decorative top pieces. Also includes 9 pieces to finish the top of the tower.

Click herefor instructions on building the ruined tower.

Will make all the blocks needed to make the ruined tower. Includes pieces for both 8 and 4 diameter circular walls, large and small arches, octagonal pillars, floor tiles and a circular stair builder piece.

Click herefor instructions on building the tower.

Will make blocks to build a 6 outside diameter tower. It includes basic building blocks, an arrow slit, round topped window, circular stairs, decorative top pieces and a 7 piece to finish the top of the tower.

Click herefor instructions on painting these accessories.

This mold will create the accessories shown which include barrels, crates, bucket, chest, crystals, grain sacks, campfire, coin pile, rock door, steel door, vase, wooden post and other items.

Click herefor instructions on using this Mold.

This mold will make conical wood shingle roofs to fit 3, 4, 6 and 8 diameter towers. Also includes wooden braces and top decoration. The inside of the blocks have a fieldstone texture.

Click herefor instructions on using this Mold.

This mold will make conical slate shingle roofs to fit 3, 4, 6 and 8 diameter towers. Also includes stone braces and top decoration. The inside of the blocks have a chipped stone texture.

Click herefor instructions on using this mold.

This mold will create short wall sections 3/4 in height. These wall sections allow a clear view of figures and game markers for many board games.

Used to connect a straight wall section into a gradually curving wall. It includes connector blocks for the 8 round tower (mold 64), the 4 circular tower (mold 52) and the 3 turret (mold 61).

This mold will not make a round tower on its own.

Used to build floors in a hex format. Each hex measures 1.5 from flat-to-flat and 1/4 thick.

counts as two molds when figuring the discount.

Used to build ground in a hex format. Each hex measures 1.5 from flat-to-flat and 1/4 thick.

counts as two molds when figuring the discount.

Used to build floors in a hex format. Each hex measures 1.5 from flat-to-flat and 1/4 thick.

counts as two molds when figuring the discount.

Click herefor instructions on how to use the plank mold.

Used to make wooden floors, cottages, stairs, bridges, doors, tables and almost any wooden objects you can think of.

Click herefor instructions on how to use this mold.

Used to make wooden trench walls or wood plank floors. Tiles are 1/4 thick and single planks are 1/8 thick.

Click herefor instructions on how to use this mold.

Used to make wooden trench walls or wood plank floors. Tiles are 1/4 thick and single planks are 1/8 thick.

Click herefor instructions on using this mold.

Used to add decorative windows and doors to buildings. Shown being used with half timber and panel pieces. Pieces are 1/8 thick.

name=235

Used to make ornamental roofs for churches and cathedrals. Includes tile pieces, roof peak, railings for side and front, and rail connectors with face design drainage spout.

Click hereto see examples of how this mold can be used.

This mold will make flat slate shingle roofs quickly and easily. Also includes stone braces and top decoration.

Click hereto see examples of how this mold can be used.

Used to make small stone items such as fireplaces, tombs, forges, wells, etc. Also can be used to make small brick wall sections for scales less than 25mm.

for instructions on how to use this mold.

Used to make solid stucco surfaces for walls. Tiles are 1/8 thick. Planks to cover seams are from mold 225.

for instructions on how to use this mold.

Used to make rubble rock surfaces for walls and floors. Tiles are 1/8 thick. Planks to cover seams are from mold 225.

Click herefor instructions on using this mold.

Used to make brick surfaces for walls and floors. Tiles are 1/8 thick. Planks to cover seams are from mold 225.

Click herefor instructions on how to build the bridge.

Used to make rubble bridge sides. All blocks are 1/4 thick. Pieces include large arches and railings.

Photos and instructions coming soon.

Used to make rubble floor tiles. These can be arranged in a grid for easy character movement or randomized using the smaller pieces for a fairly seamless floor.

Photos and instructions coming soon.

Used to make 1 1/2 square rubble floor tiles. They are 1/4 thick and match the same texture as mold 264.

For an easily printable catalog, see myProduct Catalogon the Building Plans Page.

To place an order immediatly, visit ourOnline Shopping Cart

All photos, articles and plans are copyrighted by Bruce Hirst and may not be used without permission.

Castlemolds(R) is a trademark of Hirst Arts Fantasy Architecture Inc.

Tagged