Domed Sticker

Domed Sticker Online

American Dynamics SpeedDome Ultra 8 Operators Manual

Manual will be automatically added to My Manuals

American Dynamics SpeedDome Ultra 8 Operators Manual

Camera dome, configuration utility version 1.01.

Configuration and users manual-46 pages

Page 11 – Chapter 1: Using the Dome Configuration …

Page 12 – Working with the Dome Configuration Util…

Page 13 – Entering the Domes Password

Page 14 – Restoring Factory Settings

Page 15 – Accessing the DirectSet Menu

Page 20 – Keeping Records for the Domes Settings

Page 21 – Chapter 2: Configuring Pan, Tilt, Zoom, …

Page 22 – Adjusting the Zoom Stop Settings

Page 24 – Configuring the Line Lock Setting

Page 26 – Return to Auto After Calling a Preset

Page 29 – Chapter 3: Configuring Camera Features

Page 30 – Adjusting White Balance Settings

Page 31 – Understanding How IR (Black & White) Mod…

Page 33 – Understanding Wide Dynamic Range

Page 35 – Working with AGC and Open Shutter Settin…

Page 38 – Setting Up Electronic Image Stabilizatio…

Page 41 – Chapter 4: Configuring Alarms, Areas, Ho…

Page 42 – Configuring Alarm Actions

Page 44 – Configuring Normal Input States for Alar…

Page 45 – Assigning the Domes Home Position

Page 47 – Setting the North Position

Page 48 – Programming Area Boundaries

Page 51 – Establishing Privacy Zones

Page 61 – Pattern OptionsFixed or Variable Spee…

Page 62 – Recording Patterns When Configured for 1…

Page 63 – Changing Camera Functions within Presets

Page 73 – Chapter 5: Configuring Text Displayed On…

Page 74 – Displaying or Hiding All Name Informatio…

Page 75 – Displaying Diagnostic Tests During Reset

Page 76 – Displaying Direction Indicators

Page 78 – Configuring the Display of Name Informat…

Page 79 – Assigning or Changing Name Information

Page 81 – Changing the Settings for Text Displayed…

Page 85 – Chapter 6: Configuring Language and Pass…

Page 87 – Setting and Enabling the Dome Password

Page 89 – Chapter 7: Displaying Dome Information

Page 90 – Viewing Dome Model Information

Page 91 – Viewing Dome Operating Statistics

Page 92 – Updating IO Board Flash Memory

Page 93 – Using the Calibration Screen

Page 95 – Viewing Base IO Status Information

Page 96 – Working With the Base IO Control Screen

Page 99 – Appendix A: SensorNet and RS-422 Command…

Page 100 – Supported Controllers and Matrix Switchi…

Page 105 – Appendix B: Manchester Command Summary

Page 109 – Supported SpeedDome Ultra 8 Camera Dome …

Page 113 – Appendix D: Panasonic Up-the-Coax (UTC) …

Page 116 – Tested Panasonic Equipment

Page 117 – Appendix E: AD Up-the-Coax (UTC) Command…

Page 123 – Appendix F: Vicon Command Summary

Page 124 – Operating the Dome Configuration Menu

Page 125 – Setting Left and Right Auto Pan Scan Lim…

Page 127 – Appendix G: Dome Configuration Records

Page 135 – Appendix H: End User License Agreement

Also See for American Dynamics SpeedDome Ultra 8

American Dynamics SpeedDome Ultra 8 Installation And Service Manual

American Dynamics IP SpeedDome Ultra 8 Configuration And Users Manual

American Dynamics IP SpeedDome Ultra 8 Installation Manual

Related Manuals for American Dynamics SpeedDome Ultra 8

Security Camera American Dynamics SpeedDome Ultra 8 Installation And Service Manual

Security Camera American Dynamics SpeedDome Ultra 8 Installation And Service Manual

Security Camera American Dynamics SpeedDome Optima LT Specifications

Speeddomes, drones, controllers & accessories, pressurized outdoor housing, touch tracker controller, sensornet j-boxes (24 pages)

Security Camera American Dynamics SpeedDome Ultra 8 Quick Reference Manual

Camera dome configuration utility (11 pages)

IP Camera American Dynamics IP SpeedDome Ultra 8 Architect & Engineer Specification

American dynamics speeddome ultra 8: specifications (4 pages)

Digital Camera American Dynamics IP speedDome Ultra 8 Datasheet

Programmable dome camera series (2 pages)

Security Camera American Dynamics SpeedDome Ultra VIIE Operators Manual Supplement

Day/night camera dome configuration utility (15 pages)

Security Camera American Dynamics SpeedDome Ultra Installation And Service Manual

American dynamics speeddome ultra housings: install guide (61 pages)

Security Camera American Dynamics SpeedDome Ultra VIIE Installation And Service Manual

American dynamics speeddome ultra vii security camera: install guide (38 pages)

Security Camera American Dynamics SpeedDome Ultra VI Installation And Service Manual

American dynamics speeddome ultra vi security camera: install guide (34 pages)

Security Camera American Dynamics SpeedDome Ultra 8 35x Specifications

Security Camera American Dynamics SpeedDome Ultra 8 22x Specifications

Summary of Contents for American Dynamics SpeedDome Ultra 8

SpeedDome Ultra 8 Camera Dome Configuration Utility Version 1.01 Operators Guide 8200-0600-01 B…

SpeedDome Ultra 8 Camera Dome Configuration Utility Operators Guide Version 1.08…

SOFTWARE LICENSE AGREEMENT A Software License Agreement appears in Appendix H of this manual. Please read it carefully. Using the SpeedDome Ultra 8 Camera Dome Configuration Utility software indicates that you accept the terms and conditions of this agreement. NOTICE The information in this manual was current when published.

Displaying Direction Indicators … 74 Configuring the Display of Name Information… 76 Assigning or Changing Name Information … 77 Changing the Settings for Text Displayed On-Screen … 79 SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE 3 of 140 8200-0600-01, REV. B…

Command Summary … 103 Supported Controllers … 105 Performance Notes… 105 Appendix C: Pelco Coaxitron and P Protocols Command Summary… 107 Supported SpeedDome Ultra 8 Camera Dome Features… 107 Pelco Command Summary… 107 Performance Notes… 108 Tested Pelco Equipment … 109 Supported Pelco Features…

Preface: Before You Begin This preface provides important information that you should be familiar with before using the SpeedDome Ultra 8 camera dome. It includes a document overview, text conventions, a list of related documents, and how to obtain product help.

Notes are separated by ruled lines. Notes call attention to any items that may be of special importance. Icons identify the type of note. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Used for terms specific to the system, and text that requires special emphasis;…

Related Documents Other sources provide supplemental information about your SpeedDome Ultra 8 camera dome. These sources serve to enhance your understanding of the product and its use. The SpeedDome Ultra 8 Camera Dome Configuration Utility Quick Reference Guide (8200-0600-02) provides a brief overview of how to use the configuration utility.

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. B 8 of 140 OPERATORS GUIDE…

Chapter 1: Using the Dome Configuration Utility The SpeedDome Ultra 8 camera dome consists of a 35X or 22X optical zoom camera enclosed in compact dome housing. The 35X camera provides a black-and-white mode to enhance images obtained under low lighting conditions. The 35X camera also supports Wide Dynamic Range (WDR), which improves video performance under simultaneous indoor and outdoor lighting conditions, such as looking through an open door or window.

During naming, move the cursor to the left of the current character in the name. Save changes and exit the utility from any screen. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 1. Dome Configuration Menu DOME CONFIGURATION MENU…

If you forget the password, contact your Sales Representative for assistance. For information about programming and enabling password protection, see Chapter 6: Configuring Language and Password Settings on page 83. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 2. Enter Password screen…

To keep the changes, select No. If you choose No, the Dome Configuration Menu is displayed. Press Focus to accept the displayed option. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Reset to Factory Settings Data Not Saved, Quit Anyway? 12 of 140 8200-0600-01, REV.

Dome Configuration Menu: Area Boundaries and AGC/Shutter Limit. Accessing the DirectSet Menu The DirectSet Menu provides easy access to commonly used SpeedDome Ultra 8 camera dome features when used with compatible controllers. This allows you to change or activate features without starting the dome configuration menu.

58 SEQUENCE 59 SEQUENCE 60 SEQUENCE 10 61 SEQUENCE 11 62 SEQUENCE 12 63 SEQUENCE 13 64 SEQUENCE 14 65 SEQUENCE 15 66 SEQUENCE 16 FOCUS NEAR=previous page SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE 14 of 140 8200-0600-01, REV. B…

62 SEQUENCE 12 63 SEQUENCE 13 64 SEQUENCE 14 65 SEQUENCE 15 Use FOCUS to select page SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE 0 TOGGLE DIRECT SET MENU 1 DOME CONFIG MENU 2 AUTO IRIS & AUTO FOCUS 3 FLIP…

4+ DirectSet 5+ DirectSet 6+ DirectSet 7+ DirectSet 10+ DirectSet 11+ DirectSet SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Table 2. DirectSet commands Description (35X/22X) Toggle DirectSet Menu: Toggles between displaying and hiding the DirectSet menu. (35X/22X) Dome Config Menu: Displays the SpeedDome Ultra configuration menu.

56+ DirectSet 57+ DirectSet 58+ DirectSet 59+ DirectSet 60+ DirectSet 61+ DirectSet SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Description (35X) Auto Day/Night Mode: Resumes the most recently selected automatic IR mode setting. Auto High: B/W mode activates ~30 lux.

Refer to your controller instructions to determine if the DirectSet Menu is supported. Keeping Records for the Domes Settings Keep records for each SpeedDome Ultra 8 camera dome installed at your facility. Appendix G: Dome Configuration Records summarizes the default values for each configuration setting.

Once the tilt control is released, the dome resumes normal operation. The dome is initially installed with the automatic flip feature disabled. In this situation, the dome stops when the tilt down reaches its lower limit. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 11. Pan/Tilt/Zoom/Sync Options screen…

22X Camera Dome The SpeedDome Ultra 8 22X camera dome includes a 22X optical zoom camera with 11X digital zoom capability. The maximum possible zoom is 242X. The following example explains how 22X camera zoom stop settings work.

6. Select Exit. The Dome Configuration Menu appears. 35X Camera Dome The SpeedDome Ultra 8 35X camera dome includes a 35X optical zoom camera with 12X digital zoom capability. The maximum possible zoom is 420X. The following example explains how 35X camera zoom stop settings work.

For example, if the dome is installed in a lobby of a busy building, you may want to program presets that show different areas in the lobby. Figure 12 shows a sample floor plan for the lobby. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE 22 of 140…

Select Off to disable Freeze Frame. This displays the dome motion and lens adjustments when presets or patterns are selected. The default setting is Off. 3. Select Exit. The Dome Configuration Menu appears. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 12. Lobby Floor Plan Waiting…

Follow the steps below to program Return to Auto: 1. Access the Dome Configuration Menu by pressing Iris Open, Focus Far, and Zoom Out on your controller. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE This information also applies if you attempt to rapidly call up a series of …

The Pan / Tilt / Zoom / Sync Opts screen appears. 3. Use the joystick to highlight Return to Auto, and press Focus Far to select. The Return to Auto screen appears. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 14. Pan/Tilt/Zoom/Sync Options screen…

Dome Configuration Menu, highlight Exit and Save Changes, and press Focus Far. Note: To Auto screen. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE The EIS, WDR, and IR mode features are only available on 35X camera Figure 16. Return to Auto screen (22X)

When Camera Functions is selected from the Dome Configuration Menu, one of the following screens appears: SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE The IR mode, WDR, and EIS features are only available on 35X camera Figure 17. Camera Functions screen (35X)

Blue Minimum As the value for the red setting increases, the image appears more red. As the value decreases, the image appears less red. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 19. White Balance color relationships WHITE BALANCE On-screen Color…

Understanding How IR (Black & White) Mode Operates Note: The SpeedDome Ultra 8 camera dome provides a black-and-white (B/W) mode to improve camera performance when the light level falls below certain thresholds. This allows clear images to be obtained under low-light conditions. This is referred to as IR Mode. There are SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE…

To change the mode using Manchester protocol: enter 68, and then press Call Preset. Using the manual command has the following affect on the menu settings: SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Table 3. IR Mode parameters Camera Performance…

When the door is open, additional light from outside enters the room and distortion occurs. Without WDR, you could adjust the iris of the camera to compensate for the lighting change; SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Table 4. IR Mode menu settings The Wide Dynamic Range feature is only available on 35X camera domes.

With WDR enabled, you can see the scenes both inside and outside the loading dock area. In Figure 23, you can see the boxes stacked inside the loading dock area and the car approaching the door. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE 32 of 140…

Working with AGC and Open Shutter Settings The SpeedDome Ultra 8 camera dome provides settings for compensating for low-light scenes in color: Automatic Gain Control and Open Shutter. Automatic Gain Control (AGC) amplifies the video signal in scenes with minimal light. Many low-light scenes result in picture noise. As gain is increased, the picture noise is also amplified.

If the light were to change from red to green halfway through the field integration interval (125 milliseconds), it may appear that both the red and green lights are on simultaneously. This situation is illustrated in Figure 25. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 24. Graphical view of Shutter Limit settings…

For 22X cameras, the setting values range from 0 to 28dB. For 35X cameras, the setting values range from 10 to 32dB. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 25. Mixed field integration Red Light Red/Green Light…

Zoom Out on your controller. 2. Use the joystick to highlight Camera Functions and press Focus Far to select. The Camera Functions screen (Figure 27) appears. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE The EIS feature is only available on 35X camera domes.

5 Hz = Designed to stabilize the dome when unwanted dome movements are at 5 Hz. Off = Turns off Electronic Image Stabilization. Note: appear on the Camera Functions screen. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 27. Camera Functions screen CAMERA FUNCTIONS Auto White Bal…

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. B 38 of 140 OPERATORS GUIDE…

To change the settings, move the highlight bar to appropriate field and make the changes. To return to the Dome Configuration Menu, select Exit. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 28. Alarms/Areas/Home/Presets/PZ screen ALARMS/AREAS/HOME/PRESETS/PZ SET ALARM ACTIONS…

Note: normal. A manual reset is not available. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 29. Set Alarm Actions screen SET ALARM ACTIONS…

Choose No to prevent changes in the input states from being forwarded to the host controller. The default setting is Yes. 7. Select Exit to return to the Alarm/Areas/Home/PZ screen. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Note: The protocol (or controller) used may support fewer presets. Refer to the appropriate Appendix for additional information.

The normal state is used by both internal alarms and controller defined alarms. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 30. Set Alarm States screen…

To assign the home position, select Set Home Position from the Alarms/Areas/Home/Presets/PZ screen. The following screen (Figure 31) appears: SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE In most cases, the normal input state for a domes input should match the 43 of 140 8200-0600-01, REV.

If the selected pattern is not programmed, the dome runs the Apple Peel pattern. For output, select the number from 1 through 3 for the output you want to assign. Continue with step 5. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 31. Set Home Position screen SET HOME POSITION…

1. Select Alarms/Areas/Home/Presets/PZ from the Dome Configuration Menu. 2. Select Set North Position. The following screen (Figure 32) appears: SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE If you selected a preset that has not been programmed, preset programming 45 of 140…

Areas have been programmed around the fixtures in the room. As shown in this example, areas can be different sizes. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 32. Set North Position screen…

Note: Instructions for assigning new names appear in Chapter 5: Configuring Text Displayed On-Screen on page 71. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 33. An example of areas found in a break room Start of Area 1/…

See the note on page 5. Mark the end-point of the area. The area number automatically advances. 6. Repeat steps 4 and 5 for each area you want to establish. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 34. Area Boundaries screen AREA BOUNDARIES…

Zones are active. The menus change to one-sized text if Privacy Zones are hidden or deleted. To program Privacy Zones, select Privacy Zones from the Alarms/Areas/Home/Presets/ PZ screen. The following screen (Figure 35) appears: SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE You will receive an error message under the following conditions:…

The domes firmware prevents you from establishing a zone that is too small or too large (greater than 90-degrees pan or tilt from the starting point). Figure 37 illustrates the Privacy Zone programming screen: SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 35. Privacy Zones screen…

To compensate for this limitation, you may want to program the Privacy Zone to be 20 to 25% larger than the area you want to mask. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 37. Privacy Zone Programming screen…

In this situation, the arrows blink because the target area is the same distance from all three zones. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Remember, if the arrows are blinking, you are not in a valid target area.

1. Select Alarms/Areas/Home/Presets/PZ from the Dome Configuration Menu. 2. Select Privacy Zones. The Program Privacy Zones screen displays. 3. Select Delete All Zones. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 39. Deleting Privacy Zone Valid Selection Zone 2…

Follow the steps below to program Sequences. 1. Access the Dome Configuration Menu (Figure 40) by pressing Iris Open, Focus Far, and Zoom Out on your controller. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE YOU ARE ABOUT TO DELETE ALL PRIVACY ZONES…

2. Highlight Alarms / Areas / Home / Presets / PZ and press Focus Far to select. The Alarms/Areas/Home/Presets/PZ screen appears. 3. Highlight Presets and press Focus Far. The Select Preset To Program screen (Figure 42) appears. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 40. Dome Configuration Menu screen DOME CONFIGURATION MENU…

9. Highlight the Dwell Time Sec field and press Zoom In/Out until the number of seconds you want the Preset to remain on-screen appears (0-60 seconds in 10-second increments). SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 42. Select Preset to Program screen…

Zoom Out on your controller. 2. Highlight Alarms / Areas / Home / Presets / PZ and press Focus Far to select. The Alarms/Areas/Home/Presets/PZ screen (Figure 45) appears. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 44. Dome Configuration Menu screen…

(1-60 min.). This triggers the Sequence to run. 7. Highlight the Exit field and press Focus Far to select. 8. Continue to exit until the completely out of all programming menus. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 45. Alarms/Areas/Home/Presets/PZ screen ALARMS/AREAS/HOME/PRESETS/PZ…

Sequence will be interrupted. Pattern OptionsFixed or Variable Speed A Pattern is a series of programmed pan/tilt/zoom dome movements. The SpeedDome Ultra 8 camera dome allows you to create fixed speed or variable speed Patterns (variable speed Patterns are dependent on system capability).

1. Enter the appropriate keyboard commands to record a Pattern, using 1, 2, or 3 as your Pattern number (consult your keyboard user guide for specific steps.). The Pattern Select screen (Figure 49) appears. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 48. On-Screen Text Display screen…

When Presets are created, they adopt the dome parameters defined in the Camera Functions screen. You can now customize camera functions for each Preset by accessing the Camera Functions screen from the Presets screen. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 49. Pattern Select screen…

2. Highlight Alarms / Areas / Home / Presets / PZ and press Focus Far to select. The Alarms / Areas / Home / Presets / PZ screen appears. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE If you change the parameters in the Camera Functions menu for an Figure 50.

4. Highlight the Preset Number field and press Zoom In/Out until your desired Preset number appears. 5. Highlight Camera Functions and press Focus Far. One of the following Camera Functions screens appears. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 52. Select Preset to Program screen SELECT PRESET TO PROGRAM…

By setting left and right scan limits where the buildings wall becomes visible, you ensure that only useful video of the parking lot is being observed when the scan is active. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 54. Camera Functions screen (22X camera dome)

A stepped scan pans slowly, pausing briefly every 10 between the left and right scan limits. Once the right scan limit is reached, the scan reverses. Figure 56 illustrates the stepped scan. Each arrowhead represents a 10 step in the scan. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 55. Left and Right Scan Limits…

The DirectSet menu is not available for domes used with the Manchester protocol. 1. Select Alarms/Areas/Home/Presets/PZ from the Dome Configuration Menu. 2. Select Scan Limits. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 57. Random Scan Left Scan Limit…

PAN to LEFT limit ZOOM to mark BOUNDARY Cancel RIGHT limit to Delete CANCEL Press Focus during steps 3 or 4 to cancel scan limit programming. At the time of publication, the following American Dynamics keyboards 67 of 140 8200-0600-01, REV. B…

(Focus Far) (Focus Near) (Zoom In) or Twist joystick clockwise (Zoom Out) or Twist joystick counterclockwise SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Table 7. AD-UTC commands summary Function Start the configuration utility. Move the highlight bar on the active menu.

(Pattern) (Function+Focus Far) (Function+Focus Near) (Function+Iris Open) (Function+Iris Close) (Flip) SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Table 9. Additional dome commands Function Program selected Preset (Preset) Recall selected Preset (Ver. 0.20 keyboard only) Start selected Pattern programming (Ver. 0.20 keyboard only) Save Pattern programming (Ver.

Performance Notes Keep the following considerations in mind when using the SpeedDome Ultra 8 camera dome in the AD-UTC environment: Address Setting The camera dome must be set to address 891 to operate in the AD-UTC environment. When the dome initializes or resets, the address and protocol information (UTC_T) appear on-screen.

5 seconds. If D appears next to the zoom factor, the digital zoom is active (zooms greater than 22X). SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 59. On-Screen Text Display…

When the display of camera or area names is enabled, the information appears on the screen continuously. Preset, pattern, and alarm names appear only while they are active. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE ZOOM X140D…

If you do not want diagnostic information to appear when the dome resets, a screen displaying the firmware version numbers for the Boot and Application code and the maximum optical zoom for the dome appears. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE CAMERA NAME…

Figure 62 illustrates the locations of the Direction Indicators on the display. Figure 62. Screen locations for Direction Indicators Tilt elevation/ declination from Horizontal SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE 74 of 140 Pointing direction around the Pan axis (0359)

25 below the virtual horizon. Panning to the left points the dome towards the South. Panning to the right points the dome towards the West. Figure 64. Pointing the dome precisely southwest with a tilt elevation of 25 SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE 0…

3. Move the highlight bar to the item whose display setting you want to change. 4. Change the setting. Choose On to display name information on the monitor. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 65. Name Configuration Menu NAME CONFIGURATION MENU…

If you choose Camera Name, continue with step 6. If you choose Area Name, Preset Name, Pattern Name, or Alarm Name, continue with step 4. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE RESET PROGRAMMABLE NAMES a-z (lower case) …

Focus to select it. If you make a mistake, Zoom In moves the cursor one space right, and Zoom Out moves the cursor one space left in the name. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 66. Select Name to Program screen…

(slightly clear) or solid, with or without outlines. To change these settings, select Text Attribute Options from the On-Screen Text Display screen. The following screen appears: SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 68. Text Attribute Options screen…

If you want to change the text appearance for dome names and status information, move the highlight bar to Translucent Names. Continue with step 5. If you are finished making changes, continue with step 6. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 69. Examples of text attributes 80 of 140…

Select 7 to display text associated with dome names and status information as solid (opaque). The default setting is 4. 6. Select Exit to return to the On-Screen Text Display screen. 7. Select Exit. The Dome Configuration Menu appears. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE 81 of 140 8200-0600-01, REV. B…

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. B 82 of 140 OPERATORS GUIDE…

Selecting a Language for Dome Messages and Prompts The dome supports menus, status information, and prompts in English, Spanish, French, German, Italian, and Portuguese. Note: English. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 70. Language / Password screen LANGUAGE / PASSWORD LANGUAGE SELECTION…

Focus Far. The following screen appears for a few seconds, and then the Language / Password screen appears in the newly selected language. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 71. Language Selection screen LANGUAGE SELECTION…

Setting or Changing the Dome Password 1. Select Language/Password from the Dome Configuration Menu. 2. Select Set Password. The Set Password screen appears. SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 72. Change Language screen Change Language Please Wait Changing the language does not alter any previously programmed names.

Select ON to enable password protection. Select OFF to disable password protection. The default setting is OFF. 4. Select Exit. The Dome Configuration Menu appears. Tip: SPEEDDOME ULTRA 8 CONFIGURATION UTILITY OPERATORS GUIDE Figure 73. Set Password screen SET PASSWORD PASSWORD: ******** ABCDEFGHIJKLMNOPQRST…

Base IO Control screens contain fields that can be changed. Figure 74. Dome Information screencamera domes with outdoor IO boards Figure 75. Dome Information screencamera domes with

Tagged